USWE Elite Plug-N-Play Replacement Bladder

• Product Details

  The Elite is a revolutionary reversible bladder. The hydration bladder is made out of TPU (thermoplastic polyurethane) and comes complete with a 45-degree Blaster bite valve, easy quick connector with Plug-n-Play and flexible non-kinking Hydraflex drink tube. The hydration system is reversible for easy cleaning and drying. The hydration bladder has a patented wide slider opening for quick filling and leak-proof seal and also has RF welded seams to create superior bonds at a molecular level. The hydration bladder is BPA and PVC free and is made out of FDA and EU approved materials. The hydration bladder is also dishwasher safe. This product is made by Hydrapak LLC for USWE Sports AB.

  • The Elite is a revolutionary reversible bladder.
  • The hydration bladder is made out of TPU (thermoplastic polyurethane) and comes complete with a 45-degree Blaster bite valve, easy quick connector with Plug-n-Play and flexible non-kinking Hydraflex drink tube.
  • The hydration system is reversible for easy cleaning and drying.
  • The hydration bladder has a patented wide slider opening for quick filling and leak-proof seal and also has RF welded seams to create superior bonds at a molecular level.
  • The hydration bladder is BPA and PVC free and is made out of FDA and EU approved materials.
  • The hydration bladder is also dishwasher safe.
  • This product is made by Hydrapak LLC for USWE Sports AB.

  The best way to keep your bladder in top-notch shape is to clean it with soap and water and let it dry completely after every use. The Shape-Shift and Elite bladders are especially easy to clean because they are reversible! They are also dishwasher (top-shelf recommended) friendly. The following information is recommended by the manufacturer (Hydrapak).

  Cleaning Hydration Bladder:

  Reverse by placing your hand in the bladder, grab the bottom, and pull it back through the top opening, just like turning a sock inside-out. The molded opening can also be flipped after the bladder body has been reversed. Then, throw it in the dishwasher or rinse with mild soap and water. Make sure to let the bladder dry out completely while reversed.

  Cleaning Hose and Mouthpiece:

  All of the components are removable for easy cleaning. Disconnect the drink tube from the bladder. Grasp the bite valve in one hand and tube in the other then pull the valve firmly to remove the bite valve from the tube. Gently remove the silicone sheath from the valve and clean with Bottle Bright or mild soap and water. Clean the inside of the tube by inserting the Hydrapak Tube Brush in the open end of the tube and scrub. After drying the components, carefully reattach the sheath to the valve and re-install.

  Bladder Has a Weird Taste:

  Some users may initially notice a plastic-like taste when using any of USWE products made with TPU. This taste typically subsides over time and can be eliminated by simply squeezing juice from a lemon into the product, filling it with water, and then freezing it. After frozen, remove, thaw, and rinse.

  Report Incorrect Product Information

  ---

  Read More

• Customer Reviews

• Q&A

• # Part Numbers

  Product Variant	Manufacturer Part #
  1.0L	101219
  1.5L	101222
  2.0L	101213
  3.0L	101210

Find More