Signal Dynamics Dual Load Equalizer Module

• Product Details

  Dual Load Equalizer Module:

  The Dual Load Equalizer Module is designed to correct the issue of turn signals flashing too quickly or not at all. It does this by adding back the load to your mechanical flasher relay that was removed by converting stock incandescent turn signals to LED's. LED's don't have as much resistance as regular incandescent bulbs and this is caused by a much lower power draw. Resistance is what causes the turn signal to work correctly. Too little a load, and the blinker won't function fast enough...too much load and it will blink too quickly. What the dual load equalizer does is place an artificial load on the circuit so the original blinker will work correctly and at the right speed.

  Features:

  • Universal application for most makes and models of motorcycles.
  • Equalizer will stabilize one (1) pair of turn signals*.
  • Compatible with alarms on most motorcycles equipped with alarm systems*.
  • Potted with a heat-resistant epoxy in an aluminum case.
  • Waterproof potting prevents water damage to electrical components.
  • Simple two (2) wire tap-in installation (two (2) tap splice connectors included!).

  Please Note:

  • 1.) *The security key light will still be lit on late model Harley-Davidsons equipped with the factory security system even with this Dual-Load Equalizer installed. However, the security system is still fully functional and will not be damaged in any way.
  • 2.) *This module is only meant for ONE PAIR (2) of turn signals. If you plan to equalize your front AND rear signals, this will require TWO (2) Dual Load Equalizers.
  • 3.) Hazard flashers can be used for up to one (1) hour continuously (using hazards for extended periods of time causes heat buildup inside the module, which will not cause any damage to your motorcycle but may damage the components inside).

  Mounting and Installation:

  • To install, simply tap the brown wire onto your right turn signal output wire and tap the violet wire onto your left turn signal output wire.
  • Connect the black wire to a ground source and mount the Dual Load Equalizer.
  • It is recommended that the module be mounted in a location not subject to extreme heat conditions.
  • Signal Dynamics highly recommends mounting on a flat area of your frame away from any plastic, wiring, or exposed cloth.
  • Secure with the included double-sided adhesive pad.

  Specifications:

  • Part Number: 01008.
  • Weight: Less than 1 pound.
  • Correction limit: Two (2) turn signals.
  • System requirement: N/A.
  • Attachment method: Included double-sided adhesive pad.
  • Height (inches): 5/8.
  • Length (inches): 2-1/4.
  • Width (inches): 1-5/8.
  • Wire length (inches): 5 - 6.
  • Material: Anodized aluminum case with heat and water-resistant potting.
  • Wire: 16AWG - 20AWG.
  • Package contents: One (1) Dual Load Equalizer Module, one (1) adhesive mounting pad, three (3) tap connectors.
  • Color / finish: Black anodized.
  • Hardware included: No (none needed).
  • Connectors included: Yes (3).
  • Tools required: Wire cutters, crimp connectors; optional test light, soldering iron.
  • Waterproof: No.
  • Water resistant: Yes.
  • Heat and vibration resistant: Yes.
  • Companion product(s): N/A.

  Report Incorrect Product Information

  ---

  Read More

• Customer Reviews

• Q&A

• # Part Numbers

  Product Variant	Manufacturer Part #
  Signal Dynamics Dual Load Equalizer Module	01008

Find More