Rugged Radios Clamp On RF Noise Reducing Filter Choke Clip

• Product Details

  Eliminate audible interference caused by high frequency radio waves (RFI) by using this ferrite radio frequency noise reducer.

  Compatible with most cables.

  How to Use:

  • The ferrite material inside of the clamp acts as a miniature noise filter.
  • If you hear pops, or other unexpected noises through your headset or audio equipment while using your radio, Rugged suggests using these clamps.
  • Simply clamp on the RF Noise Reducer to any of your cables.
  • Rugged suggests you use two on each cable, approximately 3 inches away from each end.

  Suggested For:

  • Radio and intercom power cables (ground [BLACK] or live [RED] wires).
  • Speaker wires.
  • Mic cables.
  • Headset cables.

  Available Sizes:

  • Small: 3 mm and under.
  • Large: Up to 5 mm.

  Report Incorrect Product Information

  ---

  Read More

• Customer Reviews

• Q&A

• # Part Numbers

  Product Variant	Manufacturer Part #
  Large (Up To 5mm)	AUDIO-CHOKE-5MM
  Small (3mm And Under)	AUDIO-CHOKE-3MM

Find More