Motion Pro Pivot Suspension Vise

• Product Details

  Designed to make suspension service simple and quick.

  • Holds shocks and forks securely while you change oil, re-valve, or change seals.
  • Pivoting head holds parts in any position, with mechanical stops every 45 degrees.
  • Aluminum soft jaw vise holds cylindrically shaped parts utilizing a four-point grip system.
  • Large side holds 39 mm to 69 mm diameter parts.
  • Small side holds 14 mm to 39 mm diameter parts.
  • Steel frame is rigid yet has a small footprint, with four pre-drilled holes in the base for secure mounting to a bench.
  • Movable fluid catch pan with mesh insert, and threaded drain bung.

  How It Works on Forks:

  • Soft jaw fork peg holds fork slider up for removal of dust seal and seal retaining clip.
  • Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements.
  • Can be used to assist in removing compression valve assembly (use of stock front axle required).

  How It Works on Shocks:

  • Holds shock firmly around shock body, shaft or shock reservoir.
  • Facilitates removal of piston rod and seal head.
  • Facilitates removal of shock reservoir caps, chamber pistons or bladder.
  • Holds shock to remove spherical bearings or needle bearings.
  • Holds shocks for removal of shock spring.

  Report Incorrect Product Information

  ---

  Read More

• Customer Reviews

• Q&A

• # Part Numbers

  Product Variant	Manufacturer Part #
  Motion Pro Pivot Suspension Vise	08-0628

Find More