Graves Smog Block Off Plates

• Product Details

  Graves Motorsports Smog Block Off Plates are designed to seal off the ports on the valve cover used by the air injection system (AKA smog pumps or AIS). Once these are capped off, the air injection system can be safely removed.

  • Made from machined aluminum.
  • Sold in pairs (except where noted).

  The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons. Once these are capped off, the air injection system can be safely removed. These Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Graves Motorsports "G" logo. There are three reasons why you want to remove the air injection system from your bike:

  • If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.
  • To get an accurate Air:Fuel (A/F) ratio when dyno-ing the bike, the air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately, by doing this, the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.
  • This addition will typically remove the majority of popping on deceleration that can be experienced with unburned gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback.

  Report Incorrect Product Information

  ---

  Read More

• Customer Reviews

• Q&A

• Fitment

• # Part Numbers

  Product Variant	Manufacturer Part #
  Graves Smog Block Off Plates	AB011, AB013, AB014, AB015, AB016-CL77, AB017, AB018, AB008, AB022, AB020, AB021, AB023, AB025, AB027, AB028

Find More