Gears Canada Gen X-4 Heated Vest Liner

• Product Details

  Wear Gears Canada's electrically heated vest liner over your t-shirt and under your jacket to maximize warmth. Connects directly to the 12V battery in your motorcycle, snowmobile, or ATV for non-stop heat. Add a portable battery pack to keep the heat going even when you're not riding.

  • Leverages ZEPTO fiber technology; made in France, these heating fibers are so thin you wouldn't be able to notice them if not for their tremendous heat output.
  • ZEPTO fibers are lighter and heater up faster than the heating wire in Gears Canada's Gen-X3 line of heated clothing.
  • Ergonomically designed to hug the contours of your body.
  • Uniform heat delivered all over the front, back, and collar.
  • Two easily accessible side pockets on the front of the vest to keep a wallet or other essentials.
  • Breathable and water-resistant fabric.
  • The bottom edge of the vest lands just above the beltline thus maintaining your range of motion.
  • Pairs seamlessly with the heated gloves or glove liners.
  • Note: Wear this vest over a t-shirt and under a jacket to maximize heat retention.

  Choosing the Correct Size:

  • Make sure you are wearing only a t-shirt.
  • Measuring your chest (just under the arms) and then your stomach.
  • Take the larger of these two measurements as your reference point.
  • A 42 size vest is a good fit for a person with a 42-inch reference point (when worn properly, the vest should hug the contours of your body).

  Optional Portable Battery Add-on: Consider purchasing one of Gears Canada's Heated Clothing Portable Battery Kits if you'd like to use your heated vest when you get off your vehicle. In other words, a portable battery will allow you to use this vest while skiing, snowboarding, or just taking a walk on a cold day.

  Wiring:

  One 20" long Coax Battery Cord (SKU 100227-1) is included.

  You will require ONE of the below switch cords OR temperature controllers:

  • Male Coax to Female Coax Switch Cord (SKU 100222-1, sold separately).
  • Dual coax switch cord (SKU 100225-1, sold separately):
  • Required only if you plan to use the heated gloves or glove liners in conjunction with this heated vest.
  • Allows you to turn this vest and your gloves ON or OFF individually.
  • Single temperature controller (SKU 100230-1, sold separately).
  • Dual temperature controller (SKU 100231-1, sold separately):
  • Required only if you plan to use a Gears heated glove in conjunction with this heated vest.
  • Allows you to maintain the glove and vest at different temperatures.

  Also...

  • You will need the Snap-on Harness (SKU 100226-1, sold separately) if you intend on connecting any of the following to this vest:
  • Gen-X3 Heated Gloves.
  • Gen-X4 Heated Gloves.
  • Gen-X3 Heated Glove Liners.
  • Gen-X4 Heated Glove Liners.

  IMPORTANT NOTE: The Gen-X3/X4 line of heating clothing is NOT compatible with the Gen-X2 line of heated clothing. Any attempt to do so with ruin the heated clothing, and VOID your warranty immediately! Only heating elements are covered under warranty. Normal wear and tear is not a warrantable defect.

  Report Incorrect Product Information

  ---

  Read More

• Customer Reviews

• Q&A

• Sizing Info

• # Part Numbers

  Product Variant	Manufacturer Part #
  Black / Small	100312-1-S
  Black / X-Small	100312-1-XS
  Black / XX-Large	100312-1-2XL
  Black / XXX-Large	100312-1-3XL

Find More